Remove/install radial seal at drive pinion gear

Loại ar · chủ đề 35.30 · phiên bản 0101 · 2006-06-29

Áp dụng cho: REAR AXLE 740.892 /894 /896, 748.2 /704 /705 /706 /708 without through-drive

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive

Cũng áp dụng cho động cơ/hộp số: 740 892, 740 894, 740 896, 748 2**, 748 704, 748 705, 748 706, 748 708

AR35.30-W-4670E

Remove/install radial seal at drive pinion gear

22.6.06

REAR AXLE 740.892 /894 /896, 748.2 /704 /705 /706 /708
without through-drive

W35.30-1021-09

1 Nut

2 Propeller shaft

3 Collar nut

6 Radial sealing ring

4 Drive flange

5 Protective plate (only with ring gear dia.300 mm)

Figure items, etc.	Work instructions
	Notes on evaluating leakages	AH00.00-N-0011-01A
4	Remove/install drive flange at the rear axle	AR35.30-W-0473A
6	Radial sealing ring