ar3530p4670f

Remove/install radial seal at drive pinion gear

Loại ar · chủ đề 35.30 · phiên bản 0115 · 2017-08-02

Áp dụng cho: Model 460 Model 461 (except 461.331) Model 463 (except 463.270/271) up to model year 2013

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR35.30-P-4670F

Remove/install radial seal at drive pinion gear

21.07.2017

Model	460
Model	461 (except 461.331)
Model	463 (except 463.270/271)
	up to model year 2013

Remove/install radial seal at drive pinion gear

Remove/install radial seal at drive pinion gear

Shown on MODEL 463

1	Spacer washer
2	Ring
3	Oil retainer
4	Compressed ring
5	O-ring
6	Inner radial sealing ring
7	Outer radial sealing ring
8	Nut
9	Flange

P33.30-0362-01

P33.30-0352-01

	Remove
1	Remove flange (9) from drive pinion	Model 460 Model 461 (except 461.331) Model 463 (except 463.270/271) up to model year 2013/face lift 2012	AR35.30-P-0472F
2	Remove outer radial sealing ring (7) and inner radial sealing ring (6)
3	Remove O-ring (5)
	Install
4	Install O-ring (5)	 Replace O-ring (5).
5	Install inner radial sealing ring (6) and outer radial sealing ring (7)	 Pound in inner radial sealing ring (6) with washer of special tool engaged. Pound in outer radial sealing ring (7) without washer of special tool engaged.
		 Coat outer edge of radial sealing rings without outer rubber coating with sealant. Install radial sealing rings with outer rubber coating without sealant.
		 Pack the space between the dust lip and lip with grease, lubricate lip and garter spring lightly.
		Sealant, Omnifit FD 3041	*BR00.45-Z-1012-01A
		MB multipurpose grease, 400 g	*BR00.45-Z-1017-06A
		 Drift	*460589151500
6	Install flange (9) on drive pinion	Remove/install drive flange at drive pinion	AR35.30-P-0472F

Remove/install radial seal at drive pinion gear

460 589 15 15 00

Drift

Repair materials

Number	Designation	Order number
BR00.45-Z-1012-01A	Sealant, Omnifit FD 3041	A 002 989 47 20 10
BR00.45-Z-1017-06A	MB multipurpose grease, 400 g	A 001 989 34 51 11

Tài liệu được tham chiếu

ar3530p0472f