ar3530p047004gh
Checking friction torque of tapered roller bearings
Loại ar · chủ đề 35.30 · phiên bản 0110 · 2012-09-18
Áp dụng cho: MODEL 463 (except 463.270/271) /facelift 2012
Không có bằng “vi”; đang hiển thị bằng tiếng Anh.
Vị trí
Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR35.30-P-0470-04GH
| Checking friction torque of tapered roller bearings
|
|
|
MODEL
| 463 (except 463.270/271)
|
|
| /facelift 2012
|
1
| Turn differential assembly several times while applying light blows to bearing cap and differential using a plastic mallet.
|
|
| This is to ensure that the rollers of the tapered roller bearings align and settle.
|
2
| Wrap cord around the differential assembly several times.
|
3
| Attach spring balance (3), pull on cord and measure friction torque.
|
|
| Use spring balances up to 6 kg.
|
4
| Pull on spring balance (3), spin differential assembly and read off friction torque on spring balance (3).
|
|
| The difference between the measured friction torque and specified friction torque must be corrected using the appropriate shims.
|
