Install radial sealing ring on drive pinion

Loại ar · chủ đề 35.30 · phiên bản 0109 · 2009-10-23

Áp dụng cho: REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55 REAR AXLE 741.130 in MODEL 690.6 REAR AXLE 741.408 /409 in MODEL 690.6

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Dòng 690 (mẫu 6**)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Dòng 690 (mẫu 6**)

Cũng áp dụng cho động cơ/hộp số: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 43*, 741 52*, 741 530, 741 540, 741 55*

AR35.30-D-4670-02A

Install radial sealing ring on drive pinion

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-01A	SV flame starting system sealant replaced by: A001 989 25 20	A 000 989 54 20
BR00.45-Z-1008-06A	Silicone-based grease	A 001 989 28 51 10

Install radial sealing ring on drive pinion

460 589 15 15 00

Drift

D35.25-0007-01

1 Pack the space between the dust lip and sealing lip on the radial sealing ring with multipurpose grease.

2 With a sealing ring which is not lined with rubber, coat the outer circumference with sealant.

 Do not coat a sealing ring which is partially lined with rubber with sealant.

3 Using press-in drift (01) press in new radial sealing ring onto the end stop in the rear axle housing.

Illustration shows rear axle 741.408