Secure collar nut on joint flange drive pinion

Loại ar · chủ đề 35.30 · phiên bản 0102 · 2019-04-19

Áp dụng cho: Rear axle 741.710 in model 958 Rear axle 746.209/231/233/305 in model 934.2, 938.1, 958 Rear axle 746.213/230 in model 934.2 Rear axle 746.213/230 in model 958.2/4 except code ZC8 (New Final Drive-Top Performance Light) Rear axle 746.218/225 in model 382.1, 634.0 Rear axle 748.590/594 in model 934, 958

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Dòng 382 (mẫu 1**) · Dòng 634 (mẫu 0**) · Dòng 934 · Dòng 938 (mẫu 1**) · Dòng 958

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Dòng 382 (mẫu 1**) · Dòng 634 (mẫu 0**) · Dòng 934 · Dòng 938 (mẫu 1**) · Dòng 958

Cũng áp dụng cho động cơ/hộp số: 741 710, 746 209, 746 213, 746 218, 746 225, 746 230, 746 231, 746 233, 746 305, 748 590, 748 594

AR35.30-B-4670-04A

Secure collar nut on joint flange drive pinion

Rear axle	741.710 in model 958
Rear axle	746.209/231/233/305 in model 934.2, 938.1, 958
Rear axle	746.213/230 in model 934.2
Rear axle	746.213/230 in model 958.2/4
	except code ZC8 (New Final Drive-Top Performance Light)
Rear axle	746.218/225 in model 382.1, 634.0
Rear axle	748.590/594 in model 934, 958

1	Cut the nut locking lip at the locking groove region, bending the lock up to the bottom of the groove, in such a manner that the lock contacts the left side of the groove.

D35.25-0001-01