ar3330p0458a
Remove/install drive pinion
Loại ar · chủ đề 33.30 · phiên bản 0107 · 2012-04-17
Áp dụng cho: MODEL 460 MODEL 461 (except 461.331) MODEL 463 (except 463.270 /271) up to model year 2013 /facelift 2012
Không có bằng “vi”; đang hiển thị bằng tiếng Anh.
Vị trí
Nhóm chức năng 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.65 Front axle differential/axle through drive — Dòng 460 · Dòng 461 (mẫu 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR33.30-P-0458A
| Remove/install drive pinion
| 3.4.12
|
MODEL 460
MODEL 461 (except 461.331)
MODEL 463 (except 463.270 /271) up to model year 2013
/facelift 2012
1 Differential assembly
2 Nut
3 Drive flange
4 Drive pinion
5 Tapered roller bearing
6 Radial sealing ring
7 Bearing outer race
8 Compressed ring
9 Shim
| Removing
|
|
|
1
| Remove differential assembly (1)
|
| AR33.30-P-0432A
|
2
| Remove radial sealing rings (6) on drive pinion (4)
|
| AR33.30-P-0530GJ
|
3
| Remove drive pinion (4)
| Screw on support bridge. If required, drill out bores for supporting bolts to approx. 11 to 12 mm dia. or rework as elongated hole.
|
|
|
|
|
| *601589026300
|
4
| Take out tapered roller bearing (5) and compression ring (8)
|
|
|
| Checking
|
|
|
5
| Clean parts, check and replace if necessary
| Disassemble drive pinion (4) if necessary.
Disassembly or assembly takes place analog to the rear axle method:
|
|
|
|
| Disassemble/assemble drive pinion
| AR35.30-P-0459F
|
|
|
|
| *BE33.30-P-1004-05A
|
| Installation
|
|
|
6
| Install drive pinion (4)
| Screw support bridge onto axle housing and fit spindle to drive pinion (4)
|
|
|
|
|
| *601589026300
|
7
| Insert compression ring (8)
| Always replace strain ring (8).
|
|
8
| Drive in tapered roller bearing (5) using suitable sleeve
|
|
|
9
| Install radial sealing rings (6) on drive pinion (4)
| Replace all gaskets.
| AR33.30-P-0530GJ
|
10
| Check friction torque of drive pinion (4)
|
| AR33.30-P-0458-02GG
|
|
|
|
| *BE33.30-P-1001-02A
|
|
|
|
| *000589109900
|
|
|
|
| *001589492100
|
|
|
|
| *460589013100
|
11
| Install differential assembly (1)
|
| AR33.30-P-0432A
|
12
| Check concentricity of drive flange (3) and adjust if necessary
|
| AR33.30-P-0086A
|
Number
| Designation
| Model 460, 461, 463
|
|
|
|
|
|
|
|
|
|
|
BE33.30-P-1001-02A
| Friction torque of bevel gear with gaskets
| Nm
| 2,5-3,0
|
Test and adjustment values for front axle drive
Number
| Designation
| Front axle 730.3
|
|
|
|
|
|
|
|
|
|
|
|
|
BE33.30-P-1004-05A
| Specified basic dimension for front axle housing
|
| Nm
| 66
|
Tài liệu được tham chiếu
