Remove/install temperature sensor downstream SCR catalytic converter

Loại ar · chủ đề 14.40 · phiên bản 0102 · 2011-04-05

Áp dụng cho: ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4 ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Dòng 940 · Dòng 942 · Dòng 943 · Dòng 944

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Dòng 940 · Dòng 942 · Dòng 943 · Dòng 944

Cũng áp dụng cho động cơ/hộp số: 457 9**

AR14.40-W-2012B

Remove/install temperature sensor downstream SCR catalytic converter

22.3.11

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

Remove/install temperature sensor downstream SCR catalytic converter

W14.40-1015-06

1 Muffler (with reduction catalytic converter)

2 Electrical connector

3 Bracket

4 Plug housing

B116 Temperature sensor downstream of SCR catalytic converter

 	Remove/install
1	Switch off ignition
2	Disconnect electrical connector (2)	 Installation: Replace removed cable tie.
3	Detach connector housing (4) at bracket (3)
4	Remove temperature sensor downstream of SCR catalytic converter (B116) at muffler (1)		*BA14.40-N-1014-02B
5	Install in the reverse order

 Exhaust aftertreatment, Blue Tec

Number	Designation		Engine 457.9 with code MS4 or code MS5


BA14.40-N-1014-02B	Temperature sensor downstream of SCR catalytic converter on muffler	Nm	45