1 | Resonator |
2 | Noise insulation |
3 | Vacuum line |
S09.20-A004-82
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove air intake pipe. | ||
2 | Remove noise insulation (2). | ||
3 | Remove vacuum line (3) from resonator box (1). | ||
4 | Remove the resonator box (1). | WIS Service Media | |
| Check | ||
5 | Check the elastomer bearings of the resonator box (1) for damage. | If damage is identified, | |
| |||
replace the damaged elastomer bearing of the resonator box (1). | |||
6 | Check that the elastomer bearings of the resonator box (1) are seated correctly. | If necessary, | |
| |||
position the corresponding elastomer bearing of the resonator box (1) correctly. | |||
7 | Install in the reverse order. |