ap3510b3556a

Rear axle - inspect play of trailing arm mounting

Loại ap · chủ đề 35.10 · phiên bản 0101 · 2020-03-24

Áp dụng cho: Rear axle 746.973/974 in model 382, 634, 685

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.10 Complete rear axle — Dòng 382 · Dòng 634 · Dòng 685

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.40 Transverse control arm/control arm/stabilizer bar — Dòng 382 · Dòng 634 · Dòng 685

EinPAS 17 Drivetrain/axle › 17.52 Additional axle › 17.52.40 Transverse control arm/control arm/stabilizer bar — Dòng 382 · Dòng 634 · Dòng 685

Cũng áp dụng cho động cơ/hộp số: 746 973, 746 974

AP35.10-B-3556A

Rear axle - inspect play of trailing arm mounting

11.03.2020

Rear axle

746.973/974 in model 382, 634, 685

Rear axle - inspect play of trailing arm mounting

B35.20-0017-09

1

Upper trailing arm

2

Lower trailing arm

Check

1

Drive the vehicle to a suitable place for the checking

A flat, clean place and with a workshop pit is considered ideal.

2

Check the clearance of the housings (arrows) of the upper trailing arms (1) and lower trailing arms (2)

Utilize a lever placed between the trailing arms and the vehicle frame of the vehicle to pry them sideways and, checking this way if there is play.

If there is excessive play, it will be necessary to replace the bearings of the trailing arm. Follow the work steps below:

3.1

Remove the trailing arms

Only vehicles with fixed strut rod

.

AR35.20-B-0100C

3.2

Remove the trailing arms

Only vehicles with adjustable strut rod

Remove/install trailing arm

.

AR35.20-B-0100D

4

Replace strut rod pads

.

AR35.20-B-0100F

Tài liệu được tham chiếu