Fit heat insulation to trim

AN68.30-W-0006-01A

Fit heat insulation to trim

 Danger !

Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes

Wear respiratory protection, protective gloves and safety glasses. Pour adhesive into suitable and appropriately marked containers only.

AS00.00-Z-0016-01A

MODEL

940, 942, 943, 944 with BODY 944.890

with CODE F04 (Cab L (long))

without CODE DD5 (Cab with high roof)

1

Glue heat insulation (1, 2) to marked points (A) on front headliner.

 Heat insulation (1, 2) should make contact at edges (arrows B).

2

Glue heat insulation (3) to marked points (C) on right side wall paneling and glue to left right side wall paneling in same manner.

 Heat insulation (3) should be aligned with the swaged seam (arrows D).

Shown on right side wall paneling

3

Glue heat insulation (4, 5, 6, 7) to marked points (E) on rear wall paneling.

 Heat insulation (4, 5, 6, 7) should be aligned with the swaged seam (arrows F).
Lower heat insulation (6) should be aligned additionally with the cutout in the rear wall paneling (arrow G).

4

Glue heat insulation (8, 9, 10) to marked points (H) on back headliner.

 Heat insulation (8, 9, 10) should be aligned with the swaged seam (arrows J).