an4340w100105pr

Attach adhesive label to heat shield, transmission and interior trim

Loại an · chủ đề 43.40 · phiên bản 0100 · 2012-02-10

Áp dụng cho: MODEL 970.0 /2 with TRANSMISSION 712.62 /63, 715.050 /060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getriebeabhängigem Nebenabtrieb MODEL 974.2 with TRANSMISSION 712.63, 715.060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getrie

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 43 Brakes - pneumatic system and auxiliary brakes › 43.40 Retarder (electric) — Dòng 970 (mẫu 0**, 2**) · Dòng 972 (mẫu 890) · Dòng 974 (mẫu 2**)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.3 Retrofitting/modification — Dòng 970 (mẫu 0**, 2**) · Dòng 972 (mẫu 890) · Dòng 974 (mẫu 2**)

Cũng áp dụng cho động cơ/hộp số: 712 62*, 712 63*, 715 050, 715 060

AN43.40-W-1001-05PR

Attach adhesive label to heat shield, transmission and interior trim

Danger!

Risk of death caused by working on permanent magnet retarder for groups of persons with implants. Risk of injury caused by burns that may occur due to contact with the hot rotor.

For persons with implants, a minimum distance of 30 cm between the permanent magnet retarder and the body parts of the affected person is to be maintained as a safe distance from the permanent magnet retarder.

Do not touch hot or rotating parts.

AS43.40-Z-0001-01A

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1078-06

1 Stick new adhesive label (1) into trim (2).

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1086-11

2 Clean bonding area on heat shield (4).

3 Glue adhesive label (3) onto heat shield (4).

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1087-08

4 Clean bonding areas on transmission (7).

5 Stick adhesive label (5) at top right in direction of travel onto an easily visible free area on the transmission (7).

6 Stick adhesive label (6) at bottom left in direction of travel onto an easily visible free area on the transmission (7).

Tài liệu được tham chiếu