P91.10-3839-09
Shown on MODEL 453 on driver side front seat with CODE 873 (Seat heater) and without CODE S55 (Vertically adjustable driver seat) |
1 | Outer cover | 8 | Pin | S51/1 | Left front seat heater switch | ||
2 | Control lever | 9 | Electrical connector | ||||
3 | Screw | 10 | Guide lugs |
Shown on MODEL 453 on driver side front seat without CODE S55 (Vertically adjustable driver seat) |
11 | Inner paneling |
12 | Screw |
14 | Guide lugs |
P91.10-3840-01
Remove/install outer cover (1) | |||
1 | Adjust front seat to foremost position | ||
2 | Adjust front seat to the uppermost position | MODEL 453 | |
3 | Pry off adjusting lever (2) | Mounting wedge | |
4 | Unscrew bolt (3) | ||
5 | Detach outer cover (1) in the rear area | | |
6 | Release catch hook on pin (8) (arrows b) and push pin (8) of outer cover (1) out of guide in seat frame | ||
7 | Remove outer cover (1) until the electrical connector (9) of the left front seat heater switch (S51/1) or the right front seat heater switch (S51/2) is accessible | MODEL 453 | |
8 | Disconnect electrical connector (9) | MODEL 453 | |
9 | Remove outer cover (1) | ||
10 | Remove left front seat heater switch (S51/1) or right front seat heater switch (S51/2) from outer cover (1) | MODEL 453 | |
11 | Install in the reverse order | ||
Remove/install inner cover (11) | |||
12 | Adjust front seat to the rearmost position | ||
13 | Adjust front seat to the uppermost position | MODEL 453 | |
14 | Unscrew screw/bolt (12) | ||
15 | Detach inner cover (11) in the rear area | | |
16 | Push inner cover (11) down slightly in front area (arrow C) | ||
17 | Remove inner cover (11) from seat frame | ||
18 | Install in the reverse order |
110 589 03 59 00
Mounting wedge