AR83.65-P-1000GLC | Remove/install aeration/ventilation of rear interior compartment | 19.11.04 |
MODEL 461.331
P83.65-2007-02
6 Socket module, 24 V
P83.65-2003-06
Shown on left side of vehicle
1 Aeration/ventilation housing
2 Screw
3 Clip
P83.65-2004-05
Shown on left side of vehicle
4 Trim panel
P83.65-2005-05
Shown on left side of vehicle
5 Screw
| Remove/install | ||
1 | Open rear-end doors | ||
2 | Remove 24 V socket module (6) | Only when removing the left aeration/ventilation housing (1). Do not disconnect the electrical connectors from the 24 V socket module (6). | |
3 | Detach the drain hose from the aeration/ventilation housing (1) | To do this, remove clamp (3). | |
4 | Remove trim (4) | Remove screws (2), secure trim strip (4) from falling. | |
5 | Remove aeration/ventilation housing (1) | To do this, remove screws (5), check gasket, replace it if necessary. | |
6 | Install in the reverse order |