1 | Securing clamp |
2 | Gas-operated strut |
S72.20-4580-06
| Remove/install | ||
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger ! | Risk of injury from fingers being pinched or jammed when working on gas struts under pressure | Only remove and install pneumatic springs when they are not under tension and when the components are properly secured. | |
1 | Remove securing clips (1) | Use suitable tool, secure liftgate against falling down. | |
2 | Remove gas-operated strut (2) | Secure liftgate against falling down, have second person help. | |
3 | Install in the reverse order | ||
| Check | ||
4 | Perform function test |
Atıfta bulunulan belgeler
- as0000z001101a Kaputların, kapıların, kapakların ve sürgülü tavanın sökülmesi, takılması ve ayarlama çalışmaları esnasında parmakların sıkışması veya ezilmesi nedeniyle yaralanma tehlikesi
- as0000z001201a Ön gerilim altında bulunan gaz basınç yayları ile çalışırken sıkışma ve ezilme nedeniyle yaralanma tehlikesi