AR72.20-D-1901D | Remove/install rear-end door | 27.2.12 |
MODEL 903.612 /613 with CODE (PG3) Integral box body with shelf system
MODEL 903.612 /613 with CODE (PG4) Integral box body without shelf system
MODEL 903.612 with CODE (PG5) Integral box body UPS
MODEL 903.612 /613 with CODE (Z22) Post freight delivery service
D72.20-1150-09
Shown on model 903.613 with code (Z22) Post freight delivery service
1 Tailgate
5 Closing wedge
6 Nut
7 Shield
2 Rubber grommet
3 Plug connection
4 Screw
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open rear-end door (1) | ||
2.1 | Remove rubber grommet (2) | Only rear-end door (1), right door wing. | |
3.1 | Disconnect connectors (3) | Only rear-end door (1), right door wing. | |
4 | Loosen bolts (4) | Installation: Close rear-end door (1), move closing wedge (5) upward to stop and tighten bolts (4) | |
5 | Unscrew nuts (6) | Installation: Glue in nuts (4) again to prevent rear-end door (1) from loosening by itself. | |
| |||
Loctite 243 | |||
6 | Remove guard plates (7) | ||
7 | Remove rear-end door (1) | Lay rear-end door (1) down on suitable subsurface to prevent damage Installation: Adjust rear-end door to uniform gap all the way around and flush with one another. | |
8 | Install in the reverse order |
Rear-end door
Number | Designation | Model | |
BA72.20-N-1004-01A | Bolt/nut, door hinge on rear end door | Nm | 10 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |
Atıfta bulunulan belgeler
- as0000z001101a Kaputların, kapıların, kapakların ve sürgülü tavanın sökülmesi, takılması ve ayarlama çalışmaları esnasında parmakların sıkışması veya ezilmesi nedeniyle yaralanma tehlikesi