Remove/install B-pillar paneling · ar6830l4700va · Mercedes-Benz WIS

AR68.30-L-4700VA

Remove/install B-pillar paneling

12.7.01

MODEL 414.700

L68.30-0007-09

1 Top section of B-pillar paneling

2 Bottom section of B-pillar paneling

5 Edge guard

6 Clip

3 Retaining clamp

4  Assembly wedge

Modification notes

22.1.02	Value modified from 35 Nm to 30 Nm	Value in row BA91.40-P-1001-01E changed for model 414.700	*BA91.40-P-1001-01E
22.1.02	Value modified from 35 Nm to 30 Nm	Value in row BA91.40-P-1002-01E changed for model 414.700	*BA91.40-P-1002-01E

 	Remove/Install
1	Detach belt end fitting and seat belt guide bracket from B-pillar	 Bolt on belt end fitting	*BA91.40-P-1001-01E
		 Screw on front seat belt guide bracket	*BA91.40-P-1002-01E
2	Pull off edge guard (5) on B-pillar on both sides in area of top section of B-pillar paneling (1) and bottom section of B-pillar paneling (2)
3	Carefully unclip top section of B-pillar paneling (1) using assembly wedge (4) and remove	 Insert assembly wedge (4) directly next to retaining clips (3) and clips (6).Check retaining clips (3) and clips (6) for condition, replace if necessary.
			*110589035900
4	Carefully unclip bottom section of B-pillar paneling (2) using assembly wedge, pull out of cover (arrows) at the bottom and remove	 Pass the assembly wedge close up to each of the retaining clips (3).
			*110589035900
5	Install in the reverse order

 Seat belts/emergency tensioning retractors

Number	Designation		Models 414.700


BA91.40-P-1001-01E	Belt end fitting screw	NM	30
BA91.40-P-1002-01E	Screw in front upper belt guide fitting	NM	30

Assembly wedge

110 589 03 59 00