Remove/install center console

AR68.20-P-2000GQA

Remove/install center console

07.11.2014

MODEL

461

as of model year 2014

1

Side covers on center console

4

Ground cable

2

Floor-mounted shift

5

Electrical connector for yaw rate sensor

3

Upper center console cover

6

Electrical connector on center console

9

Bolt for center console

7

Electrical connector on center console

10

Bolts

8

Ground connection on center console

 

Remove/install

1

Move selector lever to position "N"

 Danger !

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect battery ground line

MODEL 461.333/334/340
as of model year 2014

AR54.10-P-0003GL



Notes on battery

AH54.10-P-0001-01A

 On vehicles with 12 Volt and 24 Volt on-board electrical system, all ground lines must be disconnected for reasons of safety.

3

Remove battery in center console

MODEL 461.304/334/344/346 with ENGINE 642.975
as of model year 2014
MODEL 461.305/333/340/343/392 with ENGINE 642.884
as of model year 2014

AR54.10-P-0005GL

4

Move seat toward rear and remove side covers on center console (1)

 Installation: Ensure that blower hoses are routed correctly.

5

Remove main battery switch

MODEL 461
as of model year 2014
with CODE E30 (Battery master switch)

6

Remove upper center console cover (3)

7

Disconnect electrical connectors at rear of cover

Only on vehicles with central locking and electrically adjustable outside mirrors.

8

Remove floor shift (2)

MODEL 461 with TRANSMISSION 722.6
as of model year 2014

AR27.60-P-0900GL

9

Disconnect ground connection on center console (8) in driver footwell

10

Unscrew bolts (10) on electrical connectors from center console (6, 7)

11

Disconnect electrical connectors from center console (6, 7) in driver footwell

12

Disconnect hose connection from battery compartment vent between passenger seat and center console

13

Remove central gateway with additional functions

AR54.21-P-0819GQ

14

Remove airbag control unit

AR91.60-P-0615GQA

15

Unscrew ground line (4) from yaw rate sensor

16

Disconnect electrical connector from yaw rate sensor (5)

17

Unscrew bolts from center console on driver and passenger side on vehicle floor

18

Unscrew bolts on center console (9) in battery compartment

19

Remove center console

20

Install in the reverse order



Check

21

Connect diagnostic system, read out fault memory and delete if necessary



AD00.00-P-2000-04A