970 589 00 31 00
Cable set
Cabin locking for works in which the cab has to be tilted forward or backwards through pulley blocks (gantry) or cranes:
1.1 | Type 932.0/1/2,315, 934.0/1/241/251, 936.315, 938.142 |
1.2 | Type 958.0/1//2/4, 979.0 |
2 | Insert the two locking pins (2) of the set of cables (3) until they reach the inner reinforced metal sheet of the housing on the cabin rear wall. |
Insert the side of the locking pin (2) that has the locking cam located closer to the end of the pin. |
W60.80-1077-06
3 | Hook the end (4) of the set of cables (3) to the hook of the pulley block or crane. |
4 | Attach the end (5) of the cables set (3) to the cross member of the vehicle side member or on any other appropriate support point. |
5 | Tension the end (5) of the set of cables (3) by tilting the cabin until the stop. |
6 | Also tension the end (4) of the set of cables (3) with the pulley block. |
B60.80-0059-06
Cabin locking for works in which the cabin cannot be removed from the tilted position or the repair position:
7.1 | Type 932.0/1/2, 934.0/1/315/241/251, 936.315, 938.142 |
7.2 | Type 958.0/1/2/4, 979.0 |
8 | Insert the two locking pins (2) of the set of cables until they reach the inner reinforced metal sheet of the housing on the cabin rear wall. |
Insert the side of the locking pin (2) that has the locking cam located closer to the end of the pin. |
W60.80-1077-06
9 | Fix the end (5) of the set of ropes (3) to the cross member of the vehicle side member. |
10 | Tension the end (5) of the set of cables (3) by tilting the cabin until the stop. |
B60.80-0059-06