Commercially available tools
Number | Designation | |
WH58.30-Z-1004-01A | Hard metal milling pin (flame form B, toothing 3 PLUS), Firma PFERD-Werkzeuge August Rüggeberg GmbH u. Co D-51709 Marienheide | |
WH58.30-Z-1022-04A | Cutting disk, dia. 50 mm, 80 m/s (max. 30,600 rpm) | |
WH58.30-Z-1023-04A | Abrasive disk, dia. 50 mm, 80 m/s (max. 23,000 rpm) | |
WH58.30-Z-1025-04A | Abrasive disk holder, Firma PFERD-Werkzeuge August Rüggeberg GmbH u. Co D-51709 Marienheide | |
WH58.30-Z-1026-04A | Work arbor, Firma PFERD-Werkzeuge August Rüggeberg GmbH u. Co D-51709 Marienheide | |
WH58.30-Z-1027-04A | Grinding caps, form L, Firma PFERD-Werkzeuge August Rüggeberg GmbH u. Co D-51709 Marienheide | |
WH58.30-Z-1028-04A | Grinding cap carrier, form L, Firma PFERD-Werkzeuge August Rüggeberg GmbH u. Co D-51709 Marienheide |
Workshop equipment
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1006-03A | Machine with flexible shaft |
WE58.40-Z-1007-03A | Angled hand piece for machine with flexible shaft |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1040-04A | Methyl ethyl ketone (MEK) cleaner | - |
G60.00-3017-10
1 Cut out damaged point with grinder and saber saw.
Completely remove damaged laminate, i.e. cracks or defects should not remain in the component.
2 Cut out overlap.
This is only possible at points with double-layer structure. Perform deeper cut on outer structure (1) than on inner (2) to reach higher strength later in repair area by overlapping.
G60.00-3018-10
3 Refinish surfaces of areas to be glued (3) with grinding compound (grain size 60) and finish with grinding compound (grain size 400)
Immediately evacuate grinding dust occurring. Remove remaining dust and dirt residues with cleaner.