AR42.10-A-0700LA | Remove, install combination cylinder | 30.8.07 |
MODEL 8 AB390.053with REAR AXLE 741.990
MODEL 8 AB390.053/054 with REAR AXLE 748.785
A42.10-0039-09
1 Combination cylinder
2 Pin
3 Split pin
6 Compressed-air line
7 Compressed-air line
4 Nut
5 Washer
| Remove/install | ||
Danger! | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; shield off hazard area if necessary. | |
1 | Secure vehicle against rolling | ||
2 | Release parking brake | ||
3 | Loosen spring-loaded actuator of combination cylinder (1) mechanically | See Operator's Manual | |
4 | Operate parking brake | ||
5 | Remove compressed air lines (6, 7) | Installation: Replace sealing rings. | |
6 | Remove pin (2) | Installation: Replace cotter pin (3). | |
7 | Remove combination cylinder (1) | | |
| Notes on self-locking nuts and bolts | ||
8 | Install in the reverse order | ||
9 | Adjust play of drum brake | ||
10 | Check function of parking brake and perform a test drive |
Brake cylinder
Atıfta bulunulan belgeler
- ah0000n000101a Kendinden emniyetli cıvata ve somunlar ile ilgili hatırlatmalar
- ar4210a0181la
- as0000z000101a Ön baskı altında bulunan yaylarda veya yay gövdelerinde çalışırken sıkışma ve ezilme nedeniyle yaralanma tehlikesi