905 589 00 43 00
711 589 07 15 00
905 589 01 63 00
Insertion tool
Assembly holder
Drift
Commercially available tools
D35.30-1148-01
01 Thrust piece for flange-side tapered roller bearing outer race
02 Thrust piece for pinion-side tapered roller bearing outer race
In order to prevent damage to the special tool, coat the insides of the thrust washers (arrow) with some grease.
D35.30-1130-01
1 Pull in tapered roller bearing outer race of pinion-side bearing using (02) and flange-side tapered roller bearing outer race using (01) together.
D35.30-1132-01
2 Install assembly holder (04) for drive pinion.
3 Insert drive pinion and use the spindle of the assembly holder to put a slight preload on the drive pinion.
4 Fit new compression ring on drive pinion.
D35.30-1131-01
5 Heat outer tapered roller bearing to approx. 80° C and drive on using drift (03).
6 Remove assembly holder (04) for drive pinion.