Remove joint flange at drive pinion

Tür ar · konu 35.30 · sürüm 0101 · 2019-04-20

Geçerli olduğu: Rear axle 741.710, 746.209 in model 958 Rear axle 746.213/230 in model 934.2 Rear axle 746.213/230 in model 958.2/4 except code ZC8 (New Final Drive-Top Performance Light) Rear axle 746.233 in model 938.1, 958 Rear axle 748.590/594 in model 934.2, 958

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 35 Arka aks › 35.30 Tahrik, Tahrik milleri — Seri 934 (modeller 2**) · Seri 938 (modeller 1**) · Seri 958

EinPAS 17 Tahrik aksamı/Aks › 17.51 Arka aks › 17.51.65 Arka aks dişli kutusu/aks tahrik çıkışlı diferansiyeli — Seri 934 (modeller 2**) · Seri 938 (modeller 1**) · Seri 958

Motorlar/şanzımanlar için de geçerli: 741 710, 746 209, 746 213, 746 230, 746 233, 748 590, 748 594

AR35.30-B-4670-01B

Remove joint flange at drive pinion

Rear axle	741.710, 746.209 in model 958
Rear axle	746.213/230 in model 934.2
Rear axle	746.213/230 in model 958.2/4
	except code ZC8 (New Final Drive-Top Performance Light)
Rear axle	746.233 in model 938.1, 958
Rear axle	748.590/594 in model 934.2, 958

035 589 01 33 00

Puller

717 589 00 31 00

Retainer wrench

1	Unlock the collar nut (2) using a suitable tool.

2	Install the  locking key on the drive flange (1) and remove the collar nut (2).

 Do not use pneumatic device to loosen the collar nut (2) as it can cause damage to the tapered roller bearings.

B35.30-0195-01

3	Install the  extractor on the drive flange (1) and extract.

 Check the drive flange (1) for damage in internal spline and the contact surface with the radial retainer.

B35.30-0196-01