Seriler
tr
ar3530b430101xb
Detach tapered roller bearings from differential case
Tür ar · konu 35.30 · sürüm 0202 · 2020-02-04
Geçerli olduğu: Rear axle 742.824, 743.457, 746.881/882 in model 368.0/1, 384.2/3 Rear axle 742.825 in model 368.0/1, 384.3 Rear axle 746.270 in model 382.1, 634.0 Rear axle 746.271 in model 382.1, 634.0 Rear axle 746.888 in model 368 Rear axle 746.984 in model 384 Rear axle 746.987/988/996/998 in model 958.1 Rear axle 746.999 in model 384.067
“tr” dilinde mevcut değil; İngilizce gösteriliyor.
Konumu
Fonksiyon grubu 2 Şasi › 35 Arka aks › 35.30 Tahrik, Tahrik milleri — Seri 368 · Seri 382 (modeller 1**) · Seri 384 · Seri 634 (modeller 0**) · Seri 958 (modeller 1**)
EinPAS 17 Tahrik aksamı/Aks › 17.51 Arka aks › 17.51.65 Arka aks dişli kutusu/aks tahrik çıkışlı diferansiyeli — Seri 368 · Seri 382 (modeller 1**) · Seri 384 · Seri 634 (modeller 0**) · Seri 958 (modeller 1**)
Motorlar/şanzımanlar için de geçerli: 742 824, 742 825, 743 457, 746 270, 746 271, 746 881, 746 882, 746 888, 746 984, 746 987, 746 988, 746 996, 746 998, 746 999
AR35.30-B-4301-01XB
Detach tapered roller bearings from differential case
Caution
Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
AS00.00-Z-0017-01A
Rear axle
742.824, 743.457, 746.881/882 in model 368.0/1, 384.2/3
Rear axle
742.825 in model 368.0/1, 384.3
Rear axle
746.270 in model 382.1, 634.0
Rear axle
746.271 in model 382.1, 634.0
Rear axle
746.888 in model 368
Rear axle
746.984 in model 384
Rear axle
746.987/988/996/998 in model 958.1
Rear axle
746.999 in model 384.067
The differential and ring gear taper roller bearings should always be replaced as a set.Remove
1
Install the buffer on the differential housing (2).
Only one of the two sides of the buffer fits in the differential.
2
Install the puller claws by the underside of the taper roller bearing cage (1).
3
Support the puller over the buffer and pull the taper roller bearing (1) out of the differential housing (2).
