ar3530b045902a

Removing and installing drive pinion head bearing

Tür ar · konu 35.30 · sürüm 0100 · 2016-02-12

Geçerli olduğu:

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 35 Arka aks › 35.30 Tahrik, Tahrik milleri — Seri 688 (modeller 272, 276, 277)

EinPAS 17 Tahrik aksamı/Aks › 17.51 Arka aks › 17.51.65 Arka aks dişli kutusu/aks tahrik çıkışlı diferansiyeli — Seri 688 (modeller 272, 276, 277)

Motorlar/şanzımanlar için de geçerli: 743 ***, 743 498

AR35.30-B-0459-02A

Removing and installing drive pinion head bearing

Removing and installing drive pinion head bearing

000 589 45 33 00

Puller

Removing and installing drive pinion head bearing

B33.30-0008-02

Remove

1 Remove, from the pinion, the lock-ring of the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0007-02

2 Pull the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0012-01

Installing

The inner race of the roller bearings are to be heated up to 80 °C to enable the assembly on the pinion.

3 Assemble the inner race of the roller bearing on the pinion tip with an appropriate drift.

4 Install the snap-ring.