Replace bearing bushing of trailing arm

AR35.20-B-0100-01B

Replace bearing bushing of trailing arm

Rear axle

748.5 in model 934.2, 958.4

Repair materials

Number

Designation

Order number

BR00.45-Z-1015-06A

Vaseline

Friedrich Scharr KG
Liebknechtstr. 50
70565 Stuttgart, Germany
Tel. +49 711 7868-481
Fax +49 711 7868-489
www.scharr.de

1

Support the eyelet adapter (4) of the tensioning bar (1) with an appropriate device on a press.

 Put a shim under the eyelet adapter (4) of the tensioning bar (1) in such a way that it is leveled.

2

Insert another removal device by the upper part of the bushing(5), and pull it out.

3

Clean the eyelet adapter lodging (4) and check for the lodging out-of-round condition, corrosion and wear signs.

 If there are out-of-round condition, corrosion or wear signs, the tensioning bar (1) must be replaced completely.

4

Having the tensioning bar (1) well leveled, put on the eyelet adapter lodging (4) a small layer of Vaseline, and insert a new bushing (5) with the help of a device on a press.

 Pay attention to have the bushing (5) installed correctly on the eyelet adapter (4) and pressed by the tube (5.2).