ar3235d221001c

Remove/install rubber mount at connecting rod of rear axle anti-roll bar

Tür ar · konu 32.35 · sürüm 0100 · 2003-01-21

Geçerli olduğu: MODEL 905

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 32 Süspansiyon › 32.35 Stabilizatör — Seri 905

EinPAS 17 Tahrik aksamı/Aks › 17.51 Arka aks › 17.51.40 Enine bugi kolu/bugi kolu/stabilizatör — Seri 905

AR32.35-D-2210-01C

Remove/install rubber mount at connecting rod of rear axle anti-roll bar

Remove/install rubber mount at connecting rod of rear axle anti-roll bar

668 589 00 43 00

Installation tool

Remove/install rubber mount at connecting rod of rear axle anti-roll bar
Remove/install rubber mount at connecting rod of rear axle anti-roll bar

D32.35-0034-01

Remove

1 Use a suitable drift to press bearing bush in torsion bar and connecting rods out of bearing bosses.

Install

1 Coat rubber mount with assembly oil.

2 Draw rubber mount into anti-roll bar and connecting rods .

D32.35-0035-01