ar3235d221001b

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

Tür ar · konu 32.35 · sürüm 0102 · 2001-08-21

Geçerli olduğu: MODEL 904 MODEL 690.612 /613

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 32 Süspansiyon › 32.35 Stabilizatör — Seri 690 (modeller 612, 613) · Seri 904

EinPAS 17 Tahrik aksamı/Aks › 17.51 Arka aks › 17.51.40 Enine bugi kolu/bugi kolu/stabilizatör — Seri 690 (modeller 612, 613) · Seri 904

AR32.35-D-2210-01B

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

601 589 04 43 00

Insertion device

Remove, install rubber mount at connecting rod of rear axle anti-roll bar
Remove, install rubber mount at connecting rod of rear axle anti-roll bar

D32.35-0034-01

Remove

1 Use a suitable drift to press bearing bush in torsion bar and connecting rods out of bearing bosses.

Install

1 Coat rubber mount with assembly oil.

2 Draw rubber mount into anti-roll bar and connecting rods .

D32.35-0035-01