AR32.35-A-2210LA | Remove/install anti-roll bar on rear axle | 15.1.10 |
MODEL 8AB390.053 /054 with STEERING 766.422 with REAR AXLE 748.785
A32.35-0001-10
1 Bearing cap
2 Trailing arm
3 Stabilizer
| Remove/install | ||
Danger! | Danger to life from lowering vehicle when working between wheels and body. Risk of injury by pinching or crushing when working on the air suspension. | Do not work between wheels and wheel wells or in wheel box. Only carry out check and adjustment operations from underneath the vehicle. Secure areas with moving vehicle parts against unauthorized access. | |
Installation | Replace self-locking nuts and bolts. | ||
1 | Secure vehicle against rolling | ||
2 | Jack up vehicle at rear axle | ||
3 | Support vehicle frame | ||
4 | Detach trailing arm (2) from the longitudinal link carriers | Observe the number and installation position if necessary of spacer plates fitted. | |
Installation: Insert spacer plates as per Removal. | |||
Perform chassis alignment. | |||
| |||
5 | Remove bearing cap (1) and remove stabilizer bar (3) | | |
6 | Install in the reverse order |
Rear axle stabilizer bar
Number | Designation | Model | ||
BA32.35-N-1001-03J | Bolt, bearing cap of stabilizer bar to air bellows support | Nm | 840 | |
Control arm
Atıfta bulunulan belgeler
- ar4020a0200la
- as3222z000101a Tekerlek ve üst yapı arasındaki çalışmalarda aracın indirilmesi nedeniyle hayatitehlike. Havalı süspansiyon sistemindeki çalışmalarda sıkışma veya ezilme nedeniyle yaralanma tehlikesi.