ar2850d100003a

Disassembling front axle output shaft

Tür ar · konu 28.50 · sürüm 0100 · 1999-04-06

Geçerli olduğu: MODEL 903.0 /4, 904.0 /4 with CODE (ZG1) Allrad, zuschaltbar MODEL 903.0 /4, 904.0 /4 with CODE (ZG3) Getriebeuntersetzung Allrad

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 28 Dağıtıcı şanzıman › 28.50 Dişli düzeni, Miller — Seri 903 (modeller 0**, 4**) · Seri 904 (modeller 0**, 4**)

EinPAS 17 Tahrik aksamı/Aks › 17.22 Dağıtıcı şanzıman › 17.22.45 Mil/Dişli/Senkromeç tertibatı — Seri 903 (modeller 0**, 4**) · Seri 904 (modeller 0**, 4**)

AR28.50-D-1000-03A

Disassembling front axle output shaft

Models 903.0/4, 904.0/4 with code ZG1

Models 903.0/4, 904.0/4 with code ZG3

Disassembling front axle output shaft
Disassembling front axle output shaft

387 589 02 34 00

Clamping pliers

Puller

001 589 50 33 00

Disassembling front axle output shaft
Disassembling front axle output shaft

D28.50-0037-03

1 Screw two propellor shaft bolts into the flange (15).

2 Clamp front axle output shaft (42) with flange (15) in vise.

3 Unlock and unscrew collared nut (35).

4 Pull off tapered roller bearing (37) using puller and clamping pliers

5 Remove thrust washer (38).

6 Remove output gear (39), needle bearings (40,41) and shift sleeve (43).

7 Remove front axle output shaft (42) from flange (15).

D28.50-0038-03

Disassembling front axle output shaft

D28.50-0003-01

8 Pull tapered roller bearing (44) off front axle output shaft (42) using puller and clamping pliers.