Adjustment values for crown wheel/pinion
Number | Designation | Transmissions 711.612/613 | ||
BE26.50-N-1004-01D | Roll pin length of reverse shaft | "A" | mm | 46.15 |
D26.50-0051-02
Removing
1 Turn reverse shaft (10) with reverse gear counter-clockwise (arrow) and pull upwards out of the rear section of transmission housing.
D26.50-0052-01
Measuring
2 Measure length "A" of roll pin and compare with specified dimension (refer to table).
If there is a difference, adjust the specified dimension by moving the roll pin.
D26.50-0053-02
Installing
2 Insert reverse shaft (10) with roll pin in the hole in the rear section of the transmission housing and turn clockwise (arrow) until the reverse gear abuts the transmission main shaft.
Turn the reverse shaft (10) so that the tapped holes align with the holes in the front section of the transmission housing.