G20.10-3139-11
1 Coolant pipe
2 Screw/bolt
3 Coolant hose
4 Coolant thermostat
5 O-ring
Arrow Valve
| Remove/install | ||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
1 | Open engine hood | See information from vehicle manufacturer. | |
2 | Partially drain coolant and collect it | Installation: Fill coolant up to proper level. | |
3 | Remove coolant hose (3) from coolant pipe (1) | ||
4 | Remove coolant pipe (1) | Collect coolant that flows out | |
| |||
5 | Remove coolant thermostat (4) | Installation: Install new O-ring (5). The valves (arrows) of the coolant thermostat (4) must point in the direction of travel to the left. | |
6 | Check coolant thermostat (4) | ||
7 | Install in the reverse order | ||
8 | Check coolant level and correct if necessary | ||
9 | Inspect cooling system for leaks |
Coolant pump, coolant thermostat
Atıfta bulunulan belgeler
- ap2000g2010c Motor soğutma sistemi sıvı seviyesinin kontrol edilmesi, ayarlanması. Korozyon/don önleyici maddenin kontrolü, tamamlanması
- ap2000g2080f Soğutma maddesini yenileyin
- ar2000g1010b Soğutma sisteminin sızdırmazlığını kontrol edin
- ar2010g2455b Soğutma maddesi sıcaklık regülatörünün kontrol edilmesi
- as2000z000101a Dışarı atılan sıcak soğutma maddesinden dolayı deri ve gözlerde haşlanma nedeniyleYaralanma Tehlikesi. Soğutma maddesinin yutulmasından dolayı zehirlenmetehlikesi