ar1440b2058a

Remove/install filter at inlet of pump module

Tür ar · konu 14.40 · sürüm 0103 · 2019-08-08

Geçerli olduğu: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 14 Egzoz manifoldu, Motor freni, Egzoz gazı temizleme tertibatı › 14.40 Egzos gazı ilave temizleme işlemi, AdBlue — Seri 368 (modeller 002, 004, 006, 100, 104, 106, 115, 117) · Seri 382 (modeller 1**) · Seri 384 (modeller 0**, 223) · Seri 634 (modeller 0**) · Seri 685 (modeller 282, 284, 289, 290, 295) · Seri 695 (modeller 023, 053) · Seri 958 (modeller 1**) · Seri 979 (modeller 0**, 2**)

EinPAS 15 Motor › 15.40 Egzoz sistemi/egzoz emisyon iyileştirme sistemi › 15.40.51 Pompa/dozaj cihazı/meme — Seri 368 (modeller 002, 004, 006, 100, 104, 106, 115, 117) · Seri 382 (modeller 1**) · Seri 384 (modeller 0**, 223) · Seri 634 (modeller 0**) · Seri 685 (modeller 282, 284, 289, 290, 295) · Seri 695 (modeller 023, 053) · Seri 958 (modeller 1**) · Seri 979 (modeller 0**, 2**)

Motorlar/şanzımanlar için de geçerli: 457 9**, 924 9**, 926 9**

AR14.40-B-2058A

Remove/install filter at inlet of pump module

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install filter at inlet of pump module

B14.40-0166-09

1

Pump module

3

Urea suction piping

5

Filter

2

Urea supply piping

4

Urea inlet

6

Urea coupling opening

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remove the urea supply pipe (2) on the pump module (1) and secure upward

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

Collect and dispose the drained fluid.

2

Remove the urea suction pipe (3) on the pump module (1) and secure upward

Collect and dispose the drained fluid.

3

Remove the urea coupling opening (6) on the pump module (1)

Small amounts of liquid may run-off.

.AdBlue coupling nozzle in the pumps module

*BA14.40-B-1004-02G

4

Remove the filter (5) of the urea inlet (4)

Use a screw (M5) to pull the filter (5) out.

Installation: Insert the filter (5) carefully in the urea inlet (4) until the boss of the filter (5) touches in a noticeable way.

5

Install in reverse order

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1004-02G

AdBlue coupling nozzle in the pumps module

Nm

14

Atıfta bulunulan belgeler