ar1440b2057a

Remove/install pressure limiting valve of pump module

Tür ar · konu 14.40 · sürüm 0103 · 2019-07-24

Geçerli olduğu: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 14 Egzoz manifoldu, Motor freni, Egzoz gazı temizleme tertibatı › 14.40 Egzos gazı ilave temizleme işlemi, AdBlue — Seri 368 (modeller 002, 004, 006, 100, 104, 106, 115, 117) · Seri 382 (modeller 1**) · Seri 384 (modeller 0**, 223) · Seri 634 (modeller 0**) · Seri 685 (modeller 282, 284, 289, 290, 295) · Seri 695 (modeller 023, 053) · Seri 958 (modeller 1**) · Seri 979 (modeller 0**, 2**)

EinPAS 15 Motor › 15.40 Egzoz sistemi/egzoz emisyon iyileştirme sistemi › 15.40.13 Hat/hortum/ventil — Seri 368 (modeller 002, 004, 006, 100, 104, 106, 115, 117) · Seri 382 (modeller 1**) · Seri 384 (modeller 0**, 223) · Seri 634 (modeller 0**) · Seri 685 (modeller 282, 284, 289, 290, 295) · Seri 695 (modeller 023, 053) · Seri 958 (modeller 1**) · Seri 979 (modeller 0**, 2**)

Motorlar/şanzımanlar için de geçerli: 457 9**, 924 9**, 926 9**

AR14.40-B-2057A

Remove/install pressure limiting valve of pump module

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install pressure limiting valve of pump module

B14.40-0165-09

1

Pump module

3

Screw plug on the pump module

5

Pressure regulating valve

2

Support

4

Hole

6

Puller tool

Remove

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remover the pump module (1) from the support (2) and put it aside

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

2

Remove the screw plug from the pump module (3)

While removing the screw plug from the pump module (3), small amounts of liquid may leak.

3

Engage the threaded side of the puller tool (6) in the pressure relief valve (5), and extract it

During the pressure relief valve removal (5) small quantities of fluid can leak.

The puller tool (6) is included in the repair kit.

Install

4

Introduce the new pressure relief valve (5) with the hep of the obtuse side of the puller tool (6)


Ensure that no dirt enters the bore (4):
This may cause damage to the pump module (1).

5

Install a new screw plug on the pump module (3) with sealing ring

.Pump module screw plug

*BA14.40-B-1003-02G

6

Install the pump module (1) in the support (2)

.Pumps module in the support

*BA14.40-B-1001-02G

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1001-02G

Pumps module in the support

Nm

17,6

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1003-02G

Pump module screw plug

Nm

5

Atıfta bulunulan belgeler