ar1440b2013tb

Remove/install fill level and SCR AdBlue temperature combination sensor

Tür ar · konu 14.40 · sürüm 0201 · 2019-07-24

Geçerli olduğu: Engine 924 in model 694.0 Engine 924 in model 958.0/1, 979.0 Engine 926.9 in model 695.0/3 Engine 926.9 in model 958.0/1

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 14 Egzoz manifoldu, Motor freni, Egzoz gazı temizleme tertibatı › 14.40 Egzos gazı ilave temizleme işlemi, AdBlue — Seri 694 (modeller 0**) · Seri 695 (modeller 0**, 3**) · Seri 958 (modeller 0**, 1**) · Seri 979 (modeller 0**)

EinPAS 15 Motor › 15.40 Egzoz sistemi/egzoz emisyon iyileştirme sistemi › 15.40.12 Sensör/Şalter/Kablo demeti — Seri 694 (modeller 0**) · Seri 695 (modeller 0**, 3**) · Seri 958 (modeller 0**, 1**) · Seri 979 (modeller 0**)

Motorlar/şanzımanlar için de geçerli: 924 ***, 926 9**

AR14.40-B-2013TB

Remove/install fill level and SCR AdBlue temperature combination sensor

23.07.2019

Engine

924 in model 694.0

Engine

924 in model 958.0/1, 979.0

Engine

926.9 in model 695.0/3

Engine

926.9 in model 958.0/1

Remove/install fill level and SCR AdBlue temperature combination sensor

B14.40-0114-07

1

Connector lock

3

Electric connector of the level sensor

2

Connectors

4

Level sensor

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Turn off ignition

Notes on use, material properties and handling of AdBlue®

.

AH14.40-N-0001-01A

2

Open the connector lock (1)

Press the two ends of the connector lock (1), one against the other as indicated by the arrow, until he realized that the connectors (2) are free to be removed.

3

Remove the connectors (2)

4

Seal AdBlue line with clips to prevent AdBLue leakage

Clamp

*000589543700

5

Remove the electric connector of the level sensor (3)

Turn the electric connector of the level sensor (3) counterclockwise until it is automatically released from the level sensor (4).

6

Remove the level sensor (4)

Installation: Turn the level sensor (4) counterclockwise, as indicated by the arrow.

Installation: Pay attention that the sealing ring be correctly positioned between the level sensor (4) and the AdBlue reservoir.

7

Install in reverse order

Remove/install fill level and SCR AdBlue temperature combination sensor

000 589 54 37 00

Clamp

Atıfta bulunulan belgeler