ar1322g1202a

Removing and installing poly-V-belt

Tür ar · konu 13.22 · sürüm 0100 · 1999-08-20

Geçerli olduğu: ENGINE 602.981

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 13 Hava kompresörü, Kayış düzeni › 13.22 Tekli kayış hareketi — Seri 602 (modeller 981)

EinPAS 15 Motor › 15.18 Kayış düzeni › 15.18.30 Kayış/kayış kasnağı/gerdirme tertibatı/yönlendirme makarası — Seri 602 (modeller 981)

AR13.22-G-1202A

Removing and installing poly-V-belt

15.3.99

ENGINE 602.981

Removing and installing poly-V-belt

G13.22-3101-09

	Removing
1	Remove air hose (charge air distributor pipe to charge air cooler)
2	Release tension on poly V-belt
	Lever for pressing spring tensioning lever of the poly V-belt tensioning device		WF58.50-P-3902-01A
3	Remove poly V-belt	 Check belt pulley profile and tensioning device for damage and dirt and replace if necessary.
4	Check poly V-belt, damage patterns		AP13.22-G-1351-01A
	Installing
6	Mount poly V-belt	 Do not use belt wax or similar products.
		 Mount poly V-belt following the numbered sequence starting at the idler pulley 
		Poly V-belt flow diagram	AR13.22-G-3902-02A
			*BE13.22-N-1001-01C
7	Tension poly V-belt		AR13.22-G-3902-04A
	Lever for pressing spring tensioning lever of the poly V-belt tensioning device		WF58.50-P-3902-01A
8	Install air hose (charge air distributor pipe to charge air cooler)

Test values for single-belt drive

Number	Designation			Engine 602.981 with supercharger (compressed-air system)


BE13.22-N-1001-01C	Length of belt		mm	2100

Atıfta bulunulan belgeler