Install, remove fuel return line at unit pumps

AR07.15-G-2000-06DD

Install, remove fuel return line at unit pumps

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW



Fuel return lines of unit pumps for compression test

WF58.50-G-0001-02DD

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

 Diesel injection system with unit pumps (MR/PLD)

Number

Designation

Engine 900.9, 902.9 (except 902.90), 904.9, 906.9 (except 906.90) in model 000.001

Engine 924.9, 925.9, 926.9 in model 000.001

BA07.15-N-1004-01D

Injection line to connection fitting and unit pump (MR/PLD)

Nm

35

35

Attach, remove

1

Attach line pieces (1) for prefabricated fuel return line (2) to unit pumps   .

  Use box wrench bit and  box wrench to tighten and loosen line pieces (1).

2

Appropriately clamp off the fuel return line (2) using a  clamping device (3).

3

Open cap on fuel tank.

4

Lead the long hose piece (5) in the fuel tank.

 Do not route the measuring hose (5) close to hot and rotating parts.

5

Remove in the reverse order.