ar0703l1450vb

Remove fuel distributor with injection valves

Tür ar · konu 07.03 · sürüm 0100 · 2003-03-13

Geçerli olduğu: ENGINE 166.961 /991 in MODEL 414.700

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 07 Karışım hazırlama › 07.03 Enjektör memeleri, Püskürtme valfi, Borular — Seri 166 (modeller 961, 991) · Seri 414 (modeller 700)

EinPAS 15 Motor › 15.45 Motor yönetimi › 15.45.42 Yakıt dağıtıcısı/Rail/Meme/Enjektör — Seri 166 (modeller 961, 991) · Seri 414 (modeller 700)

AR07.03-L-1450VB

Remove fuel distributor with injection valves

27.7.01

ENGINE 166.961 /991 in MODEL 414.700

Remove fuel distributor with injection valves

P07.50-0277-12

1 Fuel pipe

2 Hose clamp

3 Fuel rail

4 Torx bolt

5 Sealing ring

6 Plug connection of injector

Y62 Injector

Remove/install

1

Remove air cleaner

AR09.10-L-1050VB

2

Expose electric cable to the injectors (Y62) and separate plug connections (6)

Installation: Replace cable straps. Pay attention to routing of cables.

Danger!

Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

3

Detach fuel line (1) at fuel rail (3) and seal with a suitable plug

Inspect condition of hose clamp (2), replace if necessary.

4

Unscrew torx bolts (4) and pull fuel rail (3) together with injectors (Y62) out of intake manifold


Replace seals (5) at the injectors (Y62); oil slightly to facilitate installation.

*BA09.20-P-1001-01E

5

Install in the reverse order

Intake manifold, intake manifold preheater

Number

Designation

Engine 166.961/
991

BA09.20-P-1001-01E

Bolt, intake manifold on cylinder head

Nm

15

Atıfta bulunulan belgeler