ar0320g300002mt

Remove front crankshaft radial sealing ring

Tür ar · konu 03.20 · sürüm 0101 · 2007-01-22

Geçerli olduğu: MODEL 000.001 with ENGINE 444.901 Euro 1 MODEL 000.001 with ENGINE 444.901 Euro 2 MODEL 000.001 with ENGINE 447.903 Euro 2

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 03 Tahrik mekanizması › 03.20 Krank mili — Seri 000 (modeller 001) · Seri 444 (modeller 901) · Seri 447 (modeller 903)

EinPAS 15 Motor › 15.15 Komple içten yanmalı motor/motor gövdesi/krank tahriki › 15.15.41 Krank mili/volan/kavrama diski — Seri 000 (modeller 001) · Seri 444 (modeller 901) · Seri 447 (modeller 903)

AR03.20-G-3000-02MT

Remove front crankshaft radial sealing ring

Remove front crankshaft radial sealing ring

Removal and insertion device

541 589 02 33 00

Remove front crankshaft radial sealing ring

G03.20-3108-11

1 Attach extractor and installer (1) on crankshaft flange using bolts (2).
When tightening bolts (2) ensure that the extractor and installer (1) does not touch the crankshaft radial sealing ring; remove bolt (3) if necessary.

2 Screw in bolt (3) until the extractor and installer (1) touches crankshaft radial sealing ring.

Remove front crankshaft radial sealing ring

G03.20-3107-11

3 Using existing bores bring extractor and installer (1) through two bores (3.5 mm Ø) onto crankshaft radial sealing ring.
Bring bores into position to oppose each other diagonally.

Remove front crankshaft radial sealing ring

G03.20-3109-11

4 Tighten crankshaft radial sealing ring onto extractor and installer (1) using two sheet metal screws (4).
Use sheet metal screws M4,825

5 Screw in bolt (3) until crankshaft radial sealing ring is pulled out of front housing cover (5).

6 Remove extractor and installer (1) with crankshaft radial sealing ring from crankshaft flange.

7 Unscrew sheet metal screws (4)