P54.10-4820-09
Show on model 253.992 |
1a | Charging cable | 3 | Cap | |
1b | Charging cable | 4 | Sequence | |
2 | Charger feed-in socket | 5 | Lock |
Danger | Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame. | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on fuel cell system | ||
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Take charging cables (1a) and (1b) out of the vehicle. | ||
| Check | ||
2 | Check charging cable (1a) over the entire length, plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems occur, | |
| |||
replace charging cable (1a). | |||
After obtaining special order. | |||
3 | Check charging cable (1b) over the entire length, plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems occur, | |
| |||
replace charging cable (1b). | |||
After obtaining special order. | |||
| Install | ||
4 | Place charging cables (1a) and (1b) in vehicle. | ||
| Check | ||
5 | Check charger feed socket (2) for damage. | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. | |||
6 | Check that cap (3) is firmly seated on charger feed socket (2). | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. | |||
7 | Check drain (4) for clear passage and soiling. | | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check lock (5) by opening and closing cap (3). | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. |
Atıfta bulunulan belgeler
- ah0000p002201rfw Yakıt hücresi sistemine dair açıklamalar
- ah0000z030001a Yüksek voltaj araç şebekeli ve/veya lityum iyon akülü ve/veya gaz tahrik sistemli araçlara dair açıklamalar ve ayrıca kişisel koruyucu donanım
- ah5400p000101a Elektrostatik boşalma nedeniyle elektronik yapı parçalarında hasarların önlenmesi ile ilgili hatırlatmalar
- as0000z003001b Hidrojen tertibatındaki faaliyetler nedeniyle hidrojen çıkışına veya yakıt kabının aşırı ısınmasına bağlı olarak patlama tehlikesi. Dışarı sızan gazın ve yakıt kaplarını boşaltırken gaz ileten yapı parçalarına
- as0000z003501a U >= 30 V alternatif gerilim (AC) veya U >= 60 V doğru akım gerilimi (DC) olan yapı parçalarına ve sistemleriyle çalışmalarda hayati tehlike