ap4700b172001d

Bleed fuel system

Tür ap · konu 47.00 · sürüm 0202 · 2019-10-17

Geçerli olduğu: Engine 457.9 in model 382, 634, 685 Engine 457.9 in model 693, 695, 696, 958 Engine 457.9 in model 695 Engine 457.9, 460.984 in model 934.241/251, 938.14 Engine 460.9 in model 963 Engine 541.976 in model 936.315

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 47 Yakıt sistemi, tahrik aksamı enerji beslemesi › 47.00 Genel — Seri 382 · Seri 460 (modeller 9**, 984) · Seri 634 · Seri 685 · Seri 693 · Seri 695 · Seri 696 · Seri 934 (modeller 241, 251) · Seri 936 (modeller 315) · Seri 938 (modeller 14*) · Seri 958 · Seri 963

EinPAS 16 Motor yakıt/Enerji beslemesi › 16.10 Yakıt beslemesi › 16.10.1 Temel bilgi — Seri 382 · Seri 460 (modeller 9**, 984) · Seri 634 · Seri 685 · Seri 693 · Seri 695 · Seri 696 · Seri 934 (modeller 241, 251) · Seri 936 (modeller 315) · Seri 938 (modeller 14*) · Seri 958 · Seri 963

Motorlar/şanzımanlar için de geçerli: 457 9**, 541 976

AP47.00-B-1720-01D

Bleed fuel system

Engine

457.9 in model 382, 634, 685

Engine

457.9 in model 693, 695, 696, 958

Engine

457.9 in model 695

Engine

457.9, 460.984 in model 934.241/251, 938.14

Engine

460.9 in model 963

Engine

541.976 in model 936.315

Bleed fuel system

Engine 457.9, 460.9

B47.00-0003-01

Bleed fuel system

It is not necessary to loosen or disconnect the connections and pipings in order to bleed the fuel system.

Pump the fuel, acting on the hand pump handle (1) until you notice a strong resistance generated by system pressure raise.

Activate engine start, but do not press the accelerator. If engine does not start within 20 seconds, interrupt the start actuation and wait at least one minute before trying again. If the engine does not start, repeat the bleeding operation.

Allow engine to run for about one minute in order to completely eliminate the air from the system through self-bleeding process

B47.00-0016-01