AP09.10-B-0980M | Replace air filter element | 12.02.16 |
Vehicle 382.111, 382.154, 382.155, 382.157, 382.158, 382.175, 382.176, 382.177, 382.184, 382.186
Vehicle 634.001
B09.10-0042-01
B09.10-0043-01
Model 634.001, 382.175/176/184/186
1 Fastening strap
2 Cap
3 Primary filtering element
4 Safety element
B09.10-0040-01
B09.10-0055-01
Model 382.111
1 Fastening belt
2 Cap
3 Primary filtering element
4 Safety element
B09.10-0050-01
B09.10-0076-01
3 Primary element
4 Secondary element
| Remove and install | ||
1 | Open the engine access flap | Access to carry out maintenance and repair jobs varies according to body type/make. Refer to body maker instructions. | |
2 | Loosen the belt (1) | It is not necessary to remove the belt. | |
When fastening the belt, the position indicator (5) of the filtering element must be down | |||
3 | Remove cover (2) | Installing:Install the cover with the dust discharge valve downward at an approx. distance of 40mm, from the air compressor pipe. | |
4 | Remove the filtering element (3) | Pull carefully the element, turning it to the right and left alternately until it goes loosen. | |
InstallingUtilize liquid vaseline which is part of the replacement kit. Smear a thin layer of vaseline on the inner sealing surface of the primary element (arrow). | |||
- Exclusive utilization for the assembly of the filtering elements; - Do not ingest; - Keep away from children and pets. | |||
For improved safety, mark the replacement date on the top of the filtering element and record it in the maintenance manual. | |||
5 | Remove the safety element (4) | The safety element must be replaced every three times the main filtering element is replaced (3) or later, not exceeding two years of use. | |
Installing Utilize liquid vaseline which is part of the replacement kit. Smear a thin layer of vaseline on the outer sealing surface of the secondary element (arrow). | |||
6 | Install in reverse order |