WS18.00-N-3012C | 906 589 00 43 00 Insertion and extraction tool | FG 18/Set C | 13.1.11 |
ENGINE 900, 902, 904, 906, 924, 925, 926
906 589 00 43 00
Use: |
Insertion and extraction tool for oil spray nozzle for cooling pistons in combination with an impact extractor 355 589 01 63 00. |
|
W18.00-1020-06
The insertion and extraction tool must be reworked.
Only for deliveries which occurred before 09/03.
Rework the insertion and extraction tool
1 Rework cutout (A, B) at bracket (1)
.
2 Rework port area (arrows) on knocking-in tool (2) and extraction tool (3) based on a new oil spray nozzle (port width).
3 Apply a chamfer (C) over the whole port area (inner and outer edge) for receiving the oil spray nozzle on the knocking-in tool (2) and extraction tool (3).
A 20 mm
B 27 mm
C 1 mm 45°