WF58.50-B-4330-05HV | Connecting line for oil level check or for oil change at the retarder | Vehicles 958 | |
W58.50-1010-11
Manufacture a conductor cable according to the picture and according to the instructions from the valve extension A 385 401 00 13 shown below.
1 Release the valve element (1) from the valve extension (2).
2 Remove the two connector beads (3) from the valve extension (2) with a screwdriver.
Do not damage the gasket (joint) (4).
3 Remove the gasket (joint) (4).
4 Remove the two connector beads (3), from valve extension (2).
5 Unload valve extension (2) with compressed air.
6 Install gasket again (4).