SM91.29-W-0002B | Install ground line for seat cushion | 2.5.06 |
MODEL 930, 932, 933, 934 with CODE (SG5) "Isringhausen" standard driver suspension seat
W91.29-1107-06
1 Bolt
2 Ground cable
3 Bolt
W91.29-1108-06
3 Bolt
4 Air line
5 Seat frame
6 Ground cable
W91.29-1106-08
6 Ground cable
8 Cable lug
7 Seat frame
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 024948 | OPERATION: RETROFIT GROUND LINE FOR SEAT CUSHION ON ISRINGHAUSEN SUSPENSION SEAT, ACC. NO.: 58 218 E7 | 009 WU | --- | --- |
1 | Remove seat cushion | ||
2 | Crimp cable lug to ground line (2) | ||
3 | Using bolt and nut, fasten cable lug of ground line (2) to underside of seat cushion | Remove paint at the contact surface of the cable lug. | |
4 | Cut ground line (2) to length and crimp cable lug to ground line (2) | Cut ground line (2) to such a length that there is no pull on cable lug when it is fastened at the bolt (3) on the seat frame (5). | |
5 | Crimp cable lug to ground line (6) | ||
6 | Unscrew bolt (3). | ||
7 | Attach cable lug of ground lines (2, 6) between side trim and seat frame (5) | ||
8 | Screw in bolt (3). | ||
9 | Route ground line (6) along the air line (4) into the bottom of the seat frame (7) | Fasten cable ties as per picture. Route ground line (6) so that it cannot be chafed and fasten it to the existing air line (4). | |
10 | Route ground line (6) out of seat frame (7) | ||
11 | Cut ground line (6) to length and crimp cable lug (8) to ground line (6) | ||
12 | Screw cable lug (8) to existing threads on seat frame (7) | Remove paint at the contact surface of the cable lug (8). | |
13 | Attach seat cushion |
Parts ordering notes
Part no. | Designation | Quantity |
A 003 546 85 40 | Cable lug | 1 |
A 001 997 83 90 | Tie strap | 2 |
N 046225 004102 | Cable lug | 3 |
N 000933 004030 | Bolt M410 | 1 |
N 913002 004001 | Nut M4 | 1 |
N 000000 001145 | Bolt M612 | 1 |
--- | Electrical line 1.5...2.5 mm2 | As required |