Modification notes
P82.30-2820-05
Position of grommet on wiper shaft
A incorrect
B Correct
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text |
P | 025917 | Check grommets on wiper shaft |
P | 025918 | Correct grommets on wiper shaft (after check) |
P | 025919 | Correct supplement for grommets on wiper shaft, vehicles with transmission 722.6 |
P | 025920 | Correct supplement for grommets on wiper shaft, vehicles with transmission 722.9 |
List of affected vehicles | Model 171 from | ||
| Checking | ||
1 | Check grommets on both wiper shafts | If grommet correctly mounted (B), finish measure. If grommet is incorrectly mounted (A), continue with operation step 2. | |
| Remove/install | ||
Danger! | Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid | Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
2 | Mount grommets on wiper shaft correctly | Note correct position (B). | |
3.1 | Flush out automatic transmission and torque converter | Have 14 liters of new transmission oil ready. | |
Transmission 722.6 | |||
After this complete the measure. | |||
3.2 | Drain oil in automatic transmission and carry out filter change | Transmission 722.9 | |
Carry out operations up to operation step 14 | |||
4 | Pour in 5 liters of new transmission oil | ||
5 | Detach right attachment for oil cooler line on engine | ||
6 | Detach right oil cooler line on transmission | ||
7 | Hold oil cooler line in a bucket with scale and at least 10 liters capacity | Extend line with a hose. | |
8 | Start the engine and drain 3 liters of transmission oil into the bucket via the oil cooler line | If 3 liters are obtained, switch off engine immediately. | |
9 | Pour in 3 liters of transmission oil | ||
10 | Start engine again and drain 3 liters of transmission oil again into the bucket via the oil cooler line | If 3 liters are obtained, switch off engine immediately. | |
11 | Pour in 3 liters of transmission oil | ||
12 | Start engine again and drain 3 liters of transmission oil again into the bucket via the oil cooler line | If 3 liters are obtained, switch off engine immediately. | |
13 | Refill with remaining transmission oil | ||
14 | Install right oil cooler line on transmission | Install new sealing rings. | |
15 | Install right attachment for oil cooler line on engine | ||
16 | Check transmission oil level and correct if necessary | Transmission 722.9 | |
Transmission 722.6 |
Parts ordering notes
Part no. | Designation | Quantity |
Transmission 722.6 | ||
A 001 989 21 03 10 | Gear oil | 14 |
A 140 277 00 95 | Transmission oil filter | 1 |
A 140 271 00 80 | Gasket | 1 |
A 140 271 00 60 | Sealing ring | 1 |
A 000 271 11 60 | Sealing ring | 4 |
Transmission 722.9 | ||
A 001 989 45 03 10 | Gear oil | 14 |
A 221 277 01 95 | Transmission oil filter | 1 |
A 220 271 03 80 | Gasket | 1 |
N 007 603 012 102 | Sealing ring | 1 |
A 012 997 59 45 | O-ring | 2 |
A 004 990 35 12 | Screw | 6 |