SM72.16-D-0003A | Modification to sliding door guide rail retainer | 5.7.00 |
MODELS 901.06# /36# /37# /46# ## up to 718450
MODELS 902.06# /07# /36# /37# /46# /47# ## up to 718450
MODELS 903.06# /07# /36# /37# /46# /47# ## up to 718450
MODELS 904.06# /36# /46# ## up to 718450
D72.16-0017-06
1 Side wall paneling
2 Nut
3 Screw
4 Modified guide rail
5 Additional bolt
D72.16-1101-01
Figure 1
7 Sliding base
8 Screw
9 Washer
Figure 2
3 Grub screw
6 Additional hole
Ø 9 mm
D72.16-1102-01
| Install | ||
1 | Remove center sliding door sliding base (7). | ||
Swivel sliding door off and support back end using jack stand. | |||
Remove old guide rail | |||
Position new guide rail, fasten in place with screw (3), mark hole (6) for additional screw. | |||
Remove new guide rail again, mark hole for additional bolt with center punch and drill (Ø 9 mm). | |||
Install riveting nut M6. | |||
Mount new guide rail, fit 2 large diameter washers (Ø 6 mm) between supporting bracket to guide rail and draw-in nut. | |||
Install sliding door. Install center sliding door sliding base (7). | |||
Adjusting sliding door |
Sliding doors
Number | Designation | Models | ||
BA72.16-N-1012-01A | Nut for guide rail on body | NM | 10 | |
BA72.16-N-1013-01A | Screw for guide rail on body | NM | 10 | |
Parts ordering notes
Part no. | Designation | Quantity |
901 760 05 27 | Left guide rail | 1 |
901 760 06 27 | Right guide rail | 1 |
000 984 46 29 | Screw | 1 |
009021 006103 | Body washer (A6) | 2 |
913010 006105 | Rivet nut | 1 |