Install rear floor assembly between the longitudinal member and the rear fender

P64.20-5121-06

Shown on model 210.2

1 Install rear floor assembly (1), align it and then fasten in place using vise grip pliers.

2 Drill rivet holes on rear floor assembly (1) with diameter 6.5 mm (areas A, B, C and D).

P64.20-5122-11

Shown on model 210.2

3 Drill rivet holes on rear floor assembly (1) with diameter
6.5 mm (area E).

4 Remove rear floor assembly (1) and deburr rivet holes on rear floor assembly (1) and on body at both sides.

5 Apply zinc dust paint to insides of riveted joints.

P64.20-5123-06

Shown on model 210.2

6 Install rear floor assembly (1) and fasten in place using manual temporary fasteners..

7 Rivet rear floor assembly (1) using polygrip flat round head rivets Ø 6.414 (areas A1, B1, C1 and D1).

P64.20-5124-11

Shown on model 210.2

8 Rivet rear floor assembly (1) using polygrip flat round head rivets Ø 6.414 (area E1).

P64.20-5125-11

 Conduct following steps only for vehicles as from 1.6.1999.

9 Cut off spot welds on bracket (3) (areas F and G).

10 Remove bracket (3).

11 Coat repair points with zinc dust paint
(areas F and G).