sm6420p101201a

Remove corroded rear floor assembly between the longitudinal member and the rear fender

ประเภท sm · หัวข้อ 64.20 · เวอร์ชัน 0100 · 2007-11-15

ใช้กับ: MODEL 210

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 64 Rear wall and rear end › 64.20 Rear end — ซีรีส์ 210

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — ซีรีส์ 210

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — ซีรีส์ 210

SM64.20-P-1012-01A

Remove corroded rear floor assembly between the longitudinal member and the rear fender

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5119-06

Shown on model 210.2

1 Expose spot welds on rear floor assembly (1) and drill to diameter of 6.5 mm (area A).

2 Expose spot welds on rear floor assembly (1) and cut out (areas B and C).

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5120-11

Shown on model 210.2

3 Expose spot welds on rear floor assembly (1) and cut out (areas D and E).

4 Remove corroded rear floor assembly (1).

5 Remove any corrosion in the repair area using a shank brush.