SM64.20-P-1010A | Rectify corrosion on rear floor assembly between the longitudinal member and the rear fender | 15.1.08 |
MODEL 210
P64.20-5118-08
Shown on model 210.2
2 Bumper bracket
1 Rear floor assembly
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text |
P | 046318 | Bodyshell package: Rectify corrosion on rear floor assembly, location:..... between longitudinal member and rear fender, repair stage 1 |
P | 046319 | Bodyshell package: Rectify corrosion on rear floor assembly, location:..... between longitudinal member and rear fender, repair stage 2 |
P | 046320 | Bodyshell package: Conduct preparatory work on rear floor assembly, location:..... between longitudinal member and rear fender |
| Removing | ||
1 | Remove all detachable body components in area to be repaired. | If the removal/installation of detachable parts is not part of the previous work, an additional expense can be invoiced with operation number 601442. | |
| Checking | ||
2 | Check rear floor assembly (1) for corrosion damage and conduct repair to match repair stage | If the rear floor assembly (1) exhibits corrosion without any rust-through damage or damage to the panel edge positive crankcase ventilation (arrows), then repair stage 1 is to be carried out. | |
Conduct repair stage 1. Damage code 63A22 47/63N22 47 | |||
If the rear floor assembly (1) exhibits strong corrosion with rust-through damage or damage to the panel edge positive crankcase ventilation (arrows), then repair stage 2 is to be carried out. | |||
Conduct repair stage 2. Damage code 63A22 DA/63N22 DA | |||
| Install | ||
3 | Install all detachable body components in area to be repaired. |