Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 02 16 | Kit 3 - Retrofitting B65 12 V | |
A 670 553 03 16 | Kit 4 - Retrofitting B65 24 V | |
Parts identified with an X1 below are included in parts kit 3 Parts identified with X2 below are included in parts kit 4 | ||
A 001 431 98 15 | X1 Heated compressed-air drier (12 V) or | 1 |
A 001 431 97 15 | X2 Heated compressed-air drier (24V) | 1 |
A 668 420 02 71 | X1/2 Safety valve assy. or | 1 |
A 668 420 03 71 | safety valve assy. (only with 4800 wheelbase and transmission G60 or automatic) and | 1 |
A 668 427 19 41 | bracket (only with 4800 wheelbase and transmission G60 or automatic) | 1 |
A 020 545 71 32 | X1 Time-delay relay (12 V) or | 1 |
A 020 545 72 32 | X2 Time-delay relay (24V) | 1 |
N 007 981 004 325 | X1/2 Sheet-metal screw for time-delay relay bracket | 1 |
A 670 540 74 36 | X1/2 Waist rail wiring harness (for time-delay relay) | 1 |
A 669 540 54 36 | X1/2 Frame wiring harness (for all wheelbases) | 1 |
N 304 017 008 030 | X1/2 ISO M8x50 hexagon bolts | 2 |
A 668 427 20 41 | X1/2 Bracket for safety valve | 1 |
N 000 000 000 932 | X1/2 Clamp for safety valve | 1 |
N 914 146 006 102 | X1/2 M6x16 hexagon bolt | 1 |
N 913 023 006 001 | X1/2 M6x8 nut | 1 |
N 000 908 022 011 | X1/2 M22x1.5 plug | 1 |
N 007 603 022 403 | X1/2 Sealing ring (for opening of old safety valve) | 1 |
N 007 603 012 405 | X1/2 Sealing rings | 4 |
A 668 545 47 45 | X1/2 Pipe line (7.5m between drier + distributor) If necessary, shop-made from: 1 x plug A 000 990 68 78, 1 x right-angle plug A 002 990 28 71, 1 x elbow A 655 990 06 71, plastic pipe 12x1.5 m length 7.5 m A 000 987 28 27 | 1 |
A 000 997 08 34 | X1/2 Union screw (small) | 1 |
A 000 997 09 34 | X1/2 Union screw (large) | 1 |
A 000 994 00 47 | X1/2 Locking ring (small) | 1 |
A 000 994 01 47 | X1/2 Locking ring (large) | 1 |
A 000 994 12 48 | X1/2 Retaining clip (small) | 1 |
A 000 994 14 48 | X1/2 Retaining clip (large) | 1 |
A 005 997 89 72 | X1/2 Tube | 1 |
A 006 997 30 90 | X1/2 Cable strap | 10 |
A 001 997 84 90 | X1/2 Cable strap | 20 |
N42.20-2032-01
1 Remove glove compartment
2 Fold out electrical center
Fold out forwards
L42.60-0009-01
3 Attach relay holder K47
Screw on inside at the front right of the firewall, next to the windshield wiper motor with a sheet-metal screw in the prefinished hole at the level of the A-pillar.
N 007 981 004 329 sheet-metal screw
4 Insert time-delay relay
For drainage valve
A 020 545 71 32 or
A 020 545 72 32 time-delay relay
5 Pull auxiliary relay holder (1) behind electrical center forwards
6 Clip in red/blue cable
At contact 3 of relay K 18 (for compressor)
7 Screw on brown ground cable
At waist rail ground pin on the right next to the windshield wiper motor
8 Plug in contact pin of red/yellow cable
In connector XF.B5 (on co-driver's side, in footwell, the 5th white connector from outside) in chamber 5.